Canadian Mac Forums at ehMac banner
1 - 19 of 19 Posts

·
Premium Member
Joined
·
31,036 Posts
Discussion Starter · #1 ·
We've always explained to clients that we partition in 3 for both speed and safety.
Well here's good proof of the speed for leaving a separate Photoshop partition in the fastest part of the drive ( our standard policy )
:eek:


http://www.barefeats.com/hard33.html

We typically do a small PS partition, then a system partition then the a separate data partition. It's saved a few designers butts along the way but while we KNEW the speed was good for PS to have it's own paly area this is the first time we've seen the actually difference.....that's a big diff if your are running PS day in day out.



 

·
Registered
Joined
·
1,013 Posts
I have always partitioned in four parts..

Main system
Fonts library 3-5 gig is much more than enough..
Secondary system {Test other OS's or back up system}
Main files

I have always founs system maintenance runs faster when all those fonts are not on the boot drive... Suitcase doesn't care where they are...
 

·
Registered
Joined
·
691 Posts
I know that I should partition, but I don't know what amounts to set. Right now I have one 60gig drive which has the system, all my apps, and all my files. My second drive is 80gigs and it has all my film work files, backup of my documents, and scrach disk space. If I was to partition, how much space should I allocate to what? Whenever I think about partitioning, I always worry that one day I will want to install something and I don't have enough room in my apps partition, or a file that I work on grows larger that the partition can allow.
 

·
Registered
Joined
·
24 Posts
Macdoc, I've just partitioned drives a few times before and don't know all the ins and outs.
I'm wondering why you say to have a small photoshop scratch partition first- wouldn't this be better the larger it is?(Depending on the size of the files you use...)
 

·
Registered
Joined
·
221 Posts
My hard drive has a 5 gig partition which is alloted to photoshop only. The the secondary scratch being a 26 gig partiton which is a holding area before I use an external drive to store everything on. Its recommended that your scratch disk be 5 times the size of the largest file you work on. My files get up around 2 to 3 hundred megs so 5 gigs is pretty good. A good tip in photoshop is close any files your not working with as they use up your scratch space even if they are idle. By the way this was Macdocs set up for me and it works perfectly.
 

·
Registered
Joined
·
470 Posts
macdoc - always great advice!

I find photoshop really likes having the primary scratch partition on a separate drive from your system/programs and data.

My setup:
hard disk 1 is partitioned into three (system/apps; secondary scratch; data)
hard disk 2 is partitioned into three (backup system/apps; primary scratch; backup data)

I use scheduled CCC to backup system/apps daily and data hourly.

After lots of experimenting with G4s this seems the best for my graphics needs.

macdoc - after reading your posts and website, noting the G5 Raid performance, I'm already pondering how to set up my new G5 that I haven't even ordered yet!
Any suggestions? ;)
 

·
Premium Member
Joined
·
31,036 Posts
Discussion Starter · #9 ·
Yes that's correct for all uses audio video or photoshop a separate drive or even better a raid is useful but even there restricting the scratch to the outer "speed zone" is useful rather than just leaving PS to "fill in the gaps".

The Ssystem partition benefits being near the outer edge loading faster etc which is why we do that second but use those first 2 gigs for the programs that really need it. :D

:( Can't partition a RAID in X....yet. but even the slowest part of a RAID is faster than the fastest part of a single drive.



 

·
Registered
Joined
·
470 Posts
macdoc - Thanks, I pretty much figured that the RAID0 was faster.

If you run two internal raided disks in a G5, for ultimate working speed, do you suggest backing up to an external firewire?

I suppose the firewire disk should be equal in size to the sum of the two internals?

I wonder what the best combination is? Maybe twin 80 Gb internals and a 160 Gb firewire?
 

·
Premium Member
Joined
·
31,036 Posts
Discussion Starter · #11 ·
Putting a small scratch partition first in fastest part of the drive does two things - keep the speed for PS/scratch and that's often an area that gets damaged.
After that it's your choice just remember that your system inparticular needs breathing room - be generous

and most of all

BACK UP!! :D



 

·
Registered
Joined
·
2,812 Posts
nice post. I needed to read this. I'll be partitioning my next HD for sure. Still not entirely clear on it but i do unerstand the basics. + with the speed improvements?? :eek: no doubt!

H!
 

·
ehMac KungFu Master
Joined
·
5,768 Posts
Partitions can really be benefitical if setup correctly. For one, I still can't figure out why Apple hasn't done what Linux does and creates a dedicated swap partition for the VM system.

Even if they made it invisible it would be nice. oh wel.
 

·
Registered
Joined
·
590 Posts
I find this thread very interesting for two reasons: I have heard about partitioning drives but never really understood why, and because I have a new (new to me) machine on the way.

What I have coming is a B&W G3 @ 400mhz, 896MB RAM, 12gig and 60 gig hard drives (I think both are 5400 rpm). How should I set this unit up in light of this thread? Does it matter which drive is first as the master and which as slave? What should go on the outer part of the disk and how do you do that? (outer is the first or last partition?)

I plan on running 10.2 as the everyday operating system. I also plan on keeping a small partition to run OS 9.1 when I need it in case I face compatibility issues with my scanner.

Again I find this discussion interesting, particularily the why part, so any help is appreciated.

Sorry if this should have been a new post in Help and Troubleshooting but I latched it on here rather than start a new discussion.
 

·
Premium Member
Joined
·
31,036 Posts
Discussion Starter · #16 ·
JTMac the 160 raid + 160 FW is ideal - since you never want your working drive anywhere close to full ( keep 20% free especially with X ( note MacGenius' comment about swap files ) you don't HAVE to have a 1:1 space as backup can just be your own critical files and we recommend a system backup as well.
But a full clone is really nice. :cool:

••

MMP there will not be a huge speed gain by partitioning as your 33 meg per second bus limitation on the Blue will mean full saturation all the time. I'd use the 12 for OS9 and critical file backup, a small scratch on the 60 gig for Photoshop, maybe 2 gigs then perhaps 20 for OSX and the rest as a safe data partition.



 

·
Registered
Joined
·
590 Posts
macdoc,

Thanks for the advice...one question probably not the brightest but I'll ask anyway...is the 33mhz limit the reason some B&W owners add a Sonnet ATA 66 card (think I've seen this fairly commonlt in posts)? If so would it be worth my while to add one of these? Thanks.

Jordan,
Haven't used Vuescan...may have a look at it though, thanks for the advice as well.
 

·
Registered
Joined
·
143 Posts
I know I'm resurrecting a really old thread, but...

is the 'first' partition the same as the top partition when using Apple's Disk Utility?

is that the outer rim of the drive or the inner hub?

Are partitions set up from the outer edge to the inside edge?

thanks for your help
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top